Permeability of Concrete with Recycled Concrete Aggregate and Pozzolanic Materials under Stress.

The research reported herein studied the permeability of concrete containing recycled-concrete aggregate (RA), superfine phosphorous slag (PHS), and ground granulated blast-furnace slag (GGBS) with and without stress. Test results showed that the chloride diffusion coefficient of RA concrete (RAC) without external loads decreased with time, and the permeability of RAC is much lower than that of the reference concrete due to the on-going hydration and the pozzolanic reaction provided by the PHS and GGBS additives in the RAC mixture. The permeability of chloride under flexural load is much more sensitive than that under compressive load due to the differences in porosity and cracking pattern. At low compressive stress levels, the permeability of chloride decreased by the closing of pores and microcracks within RAC specimens. However, in a relatively short time the chloride diffusion coefficient and the chloride content increased rapidly with the increase of compressive stress when it exceeded a threshold stress level of approximate 35% of the ultimate compressive strength. Under flexural stress, the chloride transport capability increased with the increase of stress level and time. At high compressive and flexural stress levels, creep had a significant effect on the permeability of chloride in the RAC specimens due to the damage from the nucleation and propagation of microcracks over time. It is apparent that mortar cracking has more of a significant effect on the chloride transport in concrete than cracking in the interfacial transition zone (ITZ)

Analysis of the land surface heterogeneity and its impact on atmospheric variables and the aerodynamic and thermodynamic roughness lengths

The land surface heterogeneity has a very significant impact on atmospheric variables (air temperature T-a, wind speed u, and humidity q), the aerodynamic roughness length z(0m), thermodynamic roughness length z(0h), and the excess resistance to heat transfer kB(-1). First, in this study the land surface heterogeneity has been documented through the comparison of surface reflectance r(0), surface temperature T-0, net radiation flux R-n, and sensible heat flux H partitioning over the different land cover types in the experimental areas of the Global Energy and Water Cycle Experiment (GEWEX) Asian Monsoon Experiment on the Tibetan Plateau (GAME/Tibet), the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project on the Tibetan Plateau (CAMP/Tibet), the Heihe Basin Field Experiment (HEIFE), the Arid Environment Comprehensive Monitoring Plan, 95 (AECMP' 95), and the Dun Huang Experiment (DHEX). The results show that the surface heterogeneity was very significant in the areas of the HEIFE, the AECMP' 95, and the DHEX and that it was less significant in the areas of CAMP/Tibet and GAME/Tibet. Second, the vertical profiles of T-a, u, and q in the near-surface layer and above the blending height z(b) have been analyzed using the atmospheric boundary layer (ABL) tower data, radiosonde data, and tethered balloon data observed during the HEIFE, the DHEX, and the CAMP/Tibet. The results show that the land surface heterogeneity leads in the near-surface layer to different vertical profiles of u, T-a, and q overlying the surfaces of the Gobi and the oasis in the areas of the HEIFE and DHEX. The values of u, T-a, and q become well mixed above a height of about 300 m at the HEIFE and 150 m at the DHEX. z(0m), z(0h), and kB(-1) over the different land surfaces have also been determined in this study. The results show that the land surface heterogeneity leads to different aerodynamic and thermodynamic parameters over the areas of the HEIFE, the AECMP' 95, and the GAME/Tibe

Biocompatibility of a lab-on-a-pill sensor in artificial gastrointestinal environments

n this paper, we present a radiotelemetry sensor, designed as a lab-in-a-pill, which incorporates a two-channel microfabricated sensor platform for real-time measurements of temperature and pH. These two parameters have potential application for use in remote biological sensing (for example they may be used as markers that reflect the physiological environment or as indicators for disease, within the gastrointestinal tract). We have investigated the effects of biofouling on these sensors, by exploring their response time and sensitivity in a model in vitro gastrointestinal system. The artificial gastric and intestinal solutions used represent a model both for fasting, as well as for the ingestion of food and subsequent digestion to gastrointestinal chyme. The results showed a decrease in pH sensitivity after exposure of the sensors for 3 h. The response time also increased from an initial measurement time of 10 s in pure GI juice, to ca. 25 s following the ingestion of food and 80 s in simulated chyme. These in vitro results indicate that changes in viscosity in our model gastrointestinal system had a pronounced effect on the unmodified sensor

A geometric construction of the exceptional Lie algebras F4 and E8

We present a geometric construction of the exceptional Lie algebras F4 and E8 starting from the round 8- and 15-spheres, respectively, inspired by the construction of the Killing superalgebra of a supersymmetric supergravity background. (There is no supergravity in the paper.)Comment: 12 page

Lorentz Transformation from Symmetry of Reference Principle

The Lorentz Transformation is traditionally derived requiring the Principle of Relativity and light-speed universality. While the latter can be relaxed, the Principle of Relativity is seen as core to the transformation. The present letter relaxes both statements to the weaker, Symmetry of Reference Principle. Thus the resulting Lorentz transformation and its consequences (time dilatation, length contraction) are, in turn, effects of how we manage space and time.Comment: 2 page

A programmable microsystem using system-on-chip for real-time biotelemetry

A telemetry microsystem, including multiple sensors, integrated instrumentation and a wireless interface has been implemented. We have employed a methodology akin to that for System-on-Chip microelectronics to design an integrated circuit instrument containing several "intellectual property" blocks that will enable convenient reuse of modules in future projects. The present system was optimized for low-power and included mixed-signal sensor circuits, a programmable digital system, a feedback clock control loop and RF circuits integrated on a 5 mm × 5 mm silicon chip using a 0.6 μm, 3.3 V CMOS process. Undesirable signal coupling between circuit components has been investigated and current injection into sensitive instrumentation nodes was minimized by careful floor-planning. The chip, the sensors, a magnetic induction-based transmitter and two silver oxide cells were packaged into a 36 mm × 12 mm capsule format. A base station was built in order to retrieve the data from the microsystem in real-time. The base station was designed to be adaptive and timing tolerant since the microsystem design was simplified to reduce power consumption and size. The telemetry system was found to have a packet error rate of 10<sup>-</sup><sup>3</sup> using an asynchronous simplex link. Trials in animal carcasses were carried out to show that the transmitter was as effective as a conventional RF device whilst consuming less power

The influence of magnetite nano particles on the behavior of insulating oils for pulse power applications

The effects of the addition of magnetite nanoparticles on the breakdown strength of three insulating liquids have been examined. The liquids considered are: a mineral transformer oil; a synthetic ester liquid, Midel 7131, and a specialist high permittivity liquid for pulse power applications THESO. The expected increases in breakdown strength were observed in the mineral oil and synthetic ester liquids. However in the case of the high permittivity liquid no significant changes in the breakdown strength were observed. Possible explanations for the differences in the observed behavior for the THESO insulating liquid are discussed

Dark Matter Constraints on Gaugino/Higgsino Masses in Split Supersymmetry and Their Implications at Colliders

In split supersymmetry, gauginos and Higgsinos are the only supersymmetric particles which are possibly accessible at foreseeable colliders. While the direct experimental searches, such as LEP and Tevatron experiments, gave robust lower bounds on the masses of these particles, the cosmic dark matter can give some upper bounds and thus have important implications for the searches at future colliders. In this work we scrutinize such dark matter constraints and show the allowed mass range for charginos and neutralinos (the mass eigenstates of gauginos and Higgsinos). We find that the lightest chargino must be lighter than about 1 TeV under the popular assumption M_1=M_2/2 and about 2 or 3 TeV in other cases. The corresponding production rates of the lightest chargino at the CERN Large Hadron Collider (LHC) and the International Linear Colldier (ILC) are also shown. While in some parts of the allowed region the chargino pair production rate can be larger than 1 pb at LHC and 100 fb at the ILC, other parts of the region correspond to very small production rates and thus there is no guarantee to find the charginos of split supersymmetry at future colliders.Comment: version in EPJC (refs added